Note: This article covers the LED behavior only for the Backbone Pro Xbox Edition. For information on LEDs for other editions please go here.
On the Backbone Pro Xbox Edition controller you'll see an illuminated LED light encircle the orange Backbone button and a dot LED below the Xbox button. Use the chart below as a guide for the various colors and blinking patterns.
The LED behaviors for the Xbox button and the Backbone button execute at the same time. For example, while connected to a BLE device the Backbone Pro Xbox edition will show a solid green LED dot under the Xbox button and the Backbone button will show a solid Blue LED in a ring around the button.
LED Light and Behavior |
Status |
|
|---|---|---|
Xbox Button |
Backbone Button |
|
|
Green Single flash, fade out |
White Single flash, fade out |
The controller is connected to a phone in handheld mode. |
|
Green Flashing slowly |
Blue Flashing slowly |
The controller is attempting to pair with other Bluetooth devices. |
|
Green Flashing slowly |
Blue Flashing slowly |
The controller is connecting to a previous Bluetooth device. |
|
Green Solid |
Blue Solid |
The controller is connected to a device via Bluetooth. |
-- |
Orange Solid |
The controller is at 100% battery. |
-- |
Orange Flashing slowly |
The controller is charging via wired connection. |
-- |
Red Flashing slowly |
The controller battery is at critical power. |
-- |
Red Single Flash |
Gameplay capture has been initiated. |
-- |
Red Solid |
The controller battery is low. |